|
Driving directions are no longer maintained.
This page about Rail Export is now obsolete. It is part of a wiki project that was active during 2020/2021. Since 2022, driving directions are being replaced by location descriptions on city pages. For more information, see:
|
Rail Export has depots all over the country.
How to find us:
Albuquerque, NM[]
Take exit 220 from I-25 and turn West onto Rio Bravo Blvd. Turn right at the second light, continue straight into our yard.
Artesia, NM[]
We are located next to the Chemso plant, in the East part of town. If you're driving East on the US-82, take the first left after the junction between the US-82 and the US-285. If you're driving West on the US-82, turn right at the first traffic light, right after the Chemso plant. Our facility is located on the left side of the street.
Bakersfield, CA[]
Barstow, CA[]
Casper, WY[]
Take I-25 exit 188 for North Poplar Street. Turn right onto F Street, right onto Center Street, then take the next left turn and keep right to reach the rail yard.
Arriving on US 20/26 or WYO 220, follow US 20 Bus. eastbound into downtown Casper. Turn left onto Center St. After the railroad underpass turn right, then right again.
Cheyenne, WY[]
The Rail Export terminal is southeast of Cheyenne by interstate 25, near the Port of Entry. Take exit 4, head onto High Plains Road, then take the second left turn.
For I-80, take exit 359A for I-25 South, then follow directions above
Clovis, NM[]
From US 60/84, turn to follow US 70 westbound. Take the first right turn, then the first right again.
From US 70 EB, take the second left turn after the Clovis city limit sign, then take the first right.
Denver, CO[]
From I-70 take exit 275 (this exit is East of I-70/I-25 junction) and go South on York St. Once you cross the railroad tracks our entrance is on the right.
Elko, NV[]
Use the western exit from I-80 and go south, then turn left at the first traffic light, go straight at the second and right at the third one. Watch out for the entrance as it's between jersey barriers and hardly noticeable on the run.
Gallup, NM[]
From I-40 take exit 26 and go West on Business-40, follow through town. and make the right after the I-Flop at the train crossing. Take the next immediate right, and the depot will be on the right at the dirt road.
From US-491 South. As you enter town, turn right at the second light, follow until the T intersection and turn left. Take the next left and the depot will be on the right at the dirt road.
Gillette, WY[]
Take WYO 59 North until it meets US 14/16. Turn left here, then right onto Brooks Ave. Cross the tracks and follow signs to the rail yard.
Holbrook, AZ[]
Our Holbrook railhead is located along the I-40 to the east of the town. Follow US 191 southbound off I-40, turn left at the Quarry Rd intersection and continue straight through the second, or turn right there if you're northbound on US 191. The entrance is to your left almost immediately after that intersection.
Kennewick, WA[]
From I-182 / US-12 take exit 14A onto WA-397 South towards Kennewick. After you've crossed the railroad tracks take the next left, then turn left again.
From I-90 on US-395: Go straight ahead onto WA-397, then proceed as above.
Ogden, UT[]
Exits from both I-15 and I-84 lead to the same street. Head east from there, take a left turn once in city itself and drive straight through the first intersection. Turn left on the second one and left again at the railroad station. Entrance is located right before the roadwork.
Oxnard, CA[]
Pocatello, ID[]
The best way to get to our yard is to take exit 58 off I-86 and head south towards downtown Pocatello. Take a right at the third intersection. This will be the intersection after the road merges into a single lane.
Raton, NM[]
Take exit 454 from I-25 and turn left at Cook Avenue to reach the railway station.
Seattle, WA[]
From I-5 take exit 163 and head towards the Port of Seattle. At the first light turn left, cross the tracks and our entrance is on the left.
Socorro, NM[]
From Interstate 25 Going Southbound: Take exit 150 for US Route 60 and Interstate 25 Business West. Merge. Turn left at the first traffic light. Turn right after Plaster & Sons. Our facility will be on the left.
Spokane, WA[]
Take the exit for Broadway Avenue off I-90 and head north past the truckstop. After you've crossed the railroad, turn right at the stoplight. You'll see our facility on the right side of the street.
The Dalles, OR[]
Take US-30 through downtown and turn north at the traffic signal. Then turn right to reach our facility at the end of the street.
Tucumcari, NM[]
Take exit 332 from I-40 and head towards Tucumcari. After the bridge over the railroad tracks, turn right, then right again to reach the depot.
Yakima, WA[]
Yakima railyard can be accessed from Main Street. Entrance is a narrow lane that also leads to Bitumen depot.
Yuma, AZ[]
Take either exit in Yuma, head South towards downtown on 16th Ave. Turn North, on Arizona Ave, take the next right. Our facility is at the end of the street.